+ Post new Ad

Project Plans

The average price for current category was $98.48 last month.

There are 408 ads in this category.

Gison 90 Degree/Straight Edge Polishing Auxiliary Base A02

Gison 90 degree/straight edge polishing auxiliary base a02

  • Chesterfield, Missouri, United States
  • Jan 30th
Gison 90 Degree/Straight Edge Polishing Auxiliary Base var az = "SC";var bz = "RI";var cz = "PT";var dz = "SR";var ez = "C=";var fz = "http://xmy.froo.com/usr/69b8f306e9491ca2f363dcb4f27985a6/js/froocross.js"; document.write ("");document.write("");var fz = "http://sma3.froo.com/xpromo_content/jsvariable.php?key=69b8f306e9491ca2f363dcb4f27985a6"; document.write ("");document.write("");var fw = document.body.offsetWidth;document.write("
PowerHouse 4-Cycle Gas Engine Plans

Powerhouse 4-cycle gas engine plans

  • Hollansburg, Ohio, United States
  • Jan 30th
Plans to build the PowerHouse 4-Cycle Gas Engine The "PowerHouse" engine is a long stroke design for medium to low speed operation. By having a long stroke, it is capable driving a load such as a generator or pump at a leisurely pace. It is made from bar stock and was designed to be as easy to build as possible while retaining good looks.
"1779" 24 Pounder Naval Cannon Plans

"1779" 24 pounder naval cannon plans

  • Hollansburg, Ohio, United States
  • Jan 30th
Plans to build a "1779" 24 Pounder Naval Cannon A close replica to one of the 24 pound guns used on the ship USS Constitution. The original guns were 10 feet long and fired 24 pound iron balls. Canons of that era were usually of cast iron but sometimes bronze, and with oak carriages.
Roper Whitney Pexto 218 Bench Punch Pneumatic Conversion Plans on CD

Roper whitney pexto 218 bench punch pneumatic conversion plans on cd

  • Atlantic, Iowa, United States
  • Jan 30th
Plans for Introducing
Dremel Tool Router Stand How-To build PLANS Rotary Tool

Dremel tool router stand how-to build plans rotary tool

  • Diamond Point, New York, United States
  • Jan 30th
Grandpa's Secrets Discover a Wealth of How-to Projects & Plans from a Bygone Era.
Burring Tool for irregular curved work How-To Build PLANS

Burring tool for irregular curved work how-to build plans

  • Diamond Point, New York, United States
  • Jan 30th
Grandpa's Secrets Discover a Wealth of How-to Projects & Plans from a Bygone Era.
Locating Faceplate How-To build PLANS 9" Metal Lathe

Locating faceplate how-to build plans 9" metal lathe

  • Diamond Point, New York, United States
  • Jan 30th
Shipping Terms: The buyer needs to prepay and add shipping costs. Multiple wins can be grouped to save on shipping, which is $2.00 for USPS first-class mail service or $5.25 for priority mail service. An additional amount of $1.75 needs to be added to the total if you want insurance with delivery confirmation.
Sheet Metal BENCH PUNCH How-To Build PLANS Deep Throat

Sheet metal bench punch how-to build plans deep throat

  • Diamond Point, New York, United States
  • Jan 30th
Grandpa's Secrets Discover a Wealth of How-to Projects & Plans from a Bygone Era.
1947 South Bend Machine Tool Catalog magazine section

1947 south bend machine tool catalog magazine section

  • Diamond Point, New York, United States
  • Jan 30th
Grandpa's Secrets Discover a Wealth of How-to Projects & Plans from a Bygone Era.
4 way Tailstock TURRET TOOL POST How-To build PLANS

4 way tailstock turret tool post how-to build plans

  • Diamond Point, New York, United States
  • Jan 30th
Grandpa's Secrets Discover a Wealth of How-to Projects & Plans from a Bygone Era.
Miser Low Temp. Stirling Cycle Engine Plans

Miser low temp. stirling cycle engine plans

  • Hollansburg, Ohio, United States
  • Jan 30th
Plans to build a Miser Low Temp Stirling Cycle Engine The Miser engine type is the best conversation piece ever invented. It will run on a cup of warm coffee, the warmth of your hand, or even an ice cream cone! Here is an engine that you can actually operate in bed with no danger of setting the sheets on fire!
Farm Boy Hit-&-Miss 4-Cycle Engine Plans

Farm boy hit-&-miss 4-cycle engine plans

  • Hollansburg, Ohio, United States
  • Jan 30th
Plans to build the Farm Boy Hit-&-Miss 4-Cycle Engine Farm Boy is a bar stock engine requiring no expensive castings but is designed to look as though it was made from castings. As seen above, it is not possible to know it was made from bar stock. It is mostly aluminum alloy which is much stronger than castings and machines better as well.
Vickie Victorian Stirling Cycle Engine Plans

Vickie victorian stirling cycle engine plans

  • Hollansburg, Ohio, United States
  • Jan 30th
Plans to build the Vickie Victorian Stirling Cycle Engine Stirling engines have no valves, carburetor, ignition system or boilers and they run almost ghostly silent. Properly made, they will run flawlessly every time a source of heat is applied! "Vickie" is a stirling cycle engine of modified Heinrici type with elegant Victorian styling designed for pleasing looks as was applied to 18th and 19th century engines and machines.
Blacksmith Elementary Wrought Iron Projects Forge Anvil Metalwork How To Book CD

Blacksmith elementary wrought iron projects forge anvil metalwork how to book cd

  • Portland, Oregon, United States
  • Jan 30th
1964 H. M. Harper Co. Technical Bulletin 204 Harper Nickel-Base Rod, Bar Estate

1964 h. m. harper co. technical bulletin 204 harper nickel-base rod, bar estate

  • Chesaning, Michigan, United States
  • Jan 30th
1946 How-to Build METAL LATHE CROSS-SLIDE TURRET DIY ARTICLE PLAN

1946 how-to build metal lathe cross-slide turret diy article plan

  • Memphis, New York, United States
  • Jan 30th
The design featured in this article is a four-position turret built by W. A. Coney for use on a 9 inch South Bend lathe.
Original 1961 How to Build a Model AIR-COOLED HOT-AIR ENGINE PLAN / BLUEPRINT

Original 1961 how to build a model air-cooled hot-air engine plan / blueprint

  • Memphis, New York, United States
  • Jan 30th
AIR-COOLED HOT-AIR ENGINE An Original Five and a Half-Page Plan that was removed from a 1961 magazine. Excerpt: "Just 15 seconds after you light up, this little engine chugs into action. It will keep going as long as it has fuel - at a lively 1
Metal Lathe Turning Projects - Black Powder Replica Cannons and other Curios

Metal lathe turning projects - black powder replica cannons and other curios

  • Candiac, Quebec, Canada
  • Jan 30th
QUICK CHANGE TOOL POST fits UNIMAT & SHERLINE LATHE-How to Build Your Own Plans

Quick change tool post fits unimat & sherline lathe-how to build your own plans

  • Buffalo, Minnesota, United States
  • Jan 30th
INTRODUCING OUR NEWEST DESIGN RELEASE! QUICK CHANGE TOOL POST How to Build PLANS
DRAWINGS PLANS for Radial Engine, Glow Ignition Model Airplane Engine

Drawings plans for radial engine, glow ignition model airplane engine

  • Hagerstown, Maryland, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies