result point for sale, brand-new and used.

DUROMETER BRAND NEW TYRE METER 100HA SHORE A MEASURE GAUGE TIRE HARDNESS TESTER

TYPE O DUROMETER HARDNESS TESTER DIAL SHORE O RUBBER TIRE ASTM 2240 METER

HARDNESS D TESTER SHORE TYRE DIGITAL 100HD DUROMETER METER TIRE

TYPE O METER HARDNESS TESTER DIAL SHORE O DUROMETER ASTM 2240 RUBBER TIRE

Type O Hardness Tester Meter ASTM 2240 Dial Shore O Durometer Rubber Tire

HeathKit Short Top-Of-The-Line Refurbished, NIST-Traceable Calibration, Lab-Quality! HP-3325B Synthesizer/Generator With Rubidium Standard Built-In; 10,000 Times Higher Accuracy! View Our Other Auction Items

Noise/com Noise Generator model NC 8111 5 MHz - 1 Ghz applications: • CATV testing • Development testing • HDTV field testing • General Purpose specifications: • Output: White Gaussian Noise, 1 Watt, -60dBm/Hz • Output Connector: SMA • Frequency Range: 5 MHz - 1 GHz • Flatness: ±2.5 dB • Attenuator: 0 to 10 dB in 1 dB steps • Impedance: 50 Ohms • Power: 120 VAC, 60 Hz at 500 mA • Operating Temperature: -10°C to +60°C X UNTESTED, used. powers up. minor cosmetic issues.

HP 11720A Pulse Modulator 2-18 GHz UNTESTED. UNIT DOES NOT POWER UP. ON-OFF SWITCH STICKS.

HP 11846B TT/4 DQPSK I/Q Signal Generator with option 001 The HP 11846B (with option 001) is an accessory for use with the HP 8780A or HP 8782B vector signal generators. The HP 11846B with option 001 is used with a vector signal generator to provide NADC (North American Dual-mode Cellular) and PDC (Personal Digital Cellular) for simulation telephone system transmissions.

Manufacturer: Agilent Model: SMC100A Type: Signal Generator 9KHz-3.2GHz Condition: tested Unit comes calibrated with a 90 day warranty features: frequency range 9 kHz to 3.2 GHz maximum output level of typ. > +17 dBm optional high-stability reference oscillator analog modulation modes (AM/FM/?M/pulse) integrated as standard integrated overvoltage protection wear-free electronic attenuator

HP 3336B Synthesizer / Level Generator with options 001, 005 The HP 3336B Synthesizer/Level Generator is an excellent precision tracking signal source for the HP 3586B Selective Level Meter. When in the tracking mode, the frequency of the the sythesizer is automatically set to the frequency of the SLM.

Selling the following: 1) HP 8660C Synthesized Signal Generator Option 001/005 s/n:1846A02073 2) HP 86633B Modulation Section AM-FM s/n: 1857A00989 3) HP 86603A RF Section 1-2600 MHz s/n: 1816A01121 4) HP 8660C Operating/Service Manual contains schematics 5) HP 86633B Operating/Service Manual contains schematics 6) HP 86603A Operating/Service Manual contains schematics No cables (power, RF, or communication) are shipping with the unit. Exterior of unit is a bit scuffed up and dirty.

Bruel & Kjaer Type 1405 Noise Generator UNTESTED, used. powers up. very minor cosmetic issues.

Bruel & Kjaer Type 1023 Sine Generator UNTESTED, used. broken paddle on power switch (included). very minor cosmetic issues.

Manufacturer: Hewlett Packard Model: 3585A Type: Spectrum Analyzer Option: W30 Condition: TESTED & CALIBRATED. very minor cosmetic issues Unit comes with a 90 day warranty features: • 0.1 Hz Resolution • 3 Hz Resolution Bandwidth • -137 dBm to +30 dBm Measurement Range • 50 Ohm, 75 Ohm, and 1 Mohm Selectable Input Impedance • Built-in Tracking Generator • Autoranging Input Attenuator • Readout on CRT of panel settings & markers • 1001 X 1024 Digital Storage Display • HP-I

Midwest ATE Test Equipment Recyclers www.midwestate.com &n

HP 3585A Spectrum Analyzer 3585a features: • 0.1 Hz resolution • 3 Hz resolution bandwidth • -137 dBm to +30 dBm measurement range • 50 ohm, 75 ohm, and 1 Mohm selectable input impedance • built-in tracking generator • auto ranging input attenuator • readout on CRT of panel settings & markers • 1001 X 1024 digital storage display • HP-IB interface • 80 dB dynamic range • ± 0.4 dB amplitude accuracy PARTS UNIT. INPUT OVERLOAD WARNING LIGHT ON. SCREEN BLANK.

Rohde & Schwarz FSIG13 Signal Analyzer , 9KHz-13GHz This sale is for one used Rohde & Schwarz FSIG13 Signal Analyzer , 9KHz-13GHz. It passed all self tests, it looks at good working condition. Next calibration due on 08/31/2013.