shaft wheel for sale, brand-new and used.

Beeswax foundation rollers Maintenance instruction.Technical characteristicsThe size of a cell is 5,4±0,05 mm.Width of an engraving is 300 mm.Material of an engraving of plasticityDimensions:Length is 420 mm.Width is 150 mm.

Part Number 22-30, C-Series (some with integrated drive shaft, specify when buying) Specifications:

Right angle, heavy duty, 50:1 ratio gear box, I will try and lay it out for you:Pic #1) The large shaft on the face is the output shaft. The sprocket on the top is the input shaft.2) Shows the other side which you can see the housing for the worm drive, as well as an auxiliary shaft that obviously doesn't have to be used.3-4) Is the input shaft with worm drive components, which are both high quality gears with very little use5) Shaft for worm wheel6)The gear opposite end worm wheel shaft

For sale are five sets of RWM heavy duty swivel plate casters. All 20 casters are identical, and are all in good working order. I believe they were manufactured in 1998 based on a stamp on the base

general Rodrunner Sewer and Drain Cleaning Machine w/220 FT 1-1/4 cable 22 pc. THIS UNIT DOSE NOT COME WITH ANY CUTTERS YOU CAN BUY AT ANY DEALER IN THE USA BUT I DO NOT HAVE ANY OHIO RESIDENTS OR PICKUPS IN OHIO ARE REQUIRED TO PAY 7.25% TAX UNLESS TAX EXEMPTION DOCUMENTS ARE PROVIDED Today I am selling a General RodRunner Sewer Cleaning Machine with 1-1/4" Cables I tested the machine and It spins the cable fordward and Reverse. The machine has a 3/4 hp motor .

JET 577103 10-Inch Industrial Bench Grinder This Grinder was bought for me as a gift the box was opened and Grinder removed but was never used everything is there, I have no use for this big of GrinderIf you have things that need cleaning, sharpening, buffing, removing rust, or removing burs from metal, then you need this JET 10in. Industrial Bench Grinder. Features heavy-duty construction with powerful, long-life motor for use all day, every day.

8" x 2" Serrated contact wheel, for a Wilton knifemaker's square wheel grinder. This is an old school heavy duty USA made part. Used but fully functional.

This is a complete set of the wheels to build your own 2” x 48” or 2” x 72” belt knife grinder. This listing includes: One - 4” drive wheel with a bore sized for a 5/8" (.625”) drive shaft with a 3/16” keyway. It is also broached to use with keyed shaft or can be used with a smooth shaft with a flat ground on it for the set screw.

Total System “D-D Work Rest” for KMG Knife Maker Belt Grinders (Since I don’t own all types of grinders, for display purpose only the Total system is shown mounted on my Bader Grinder)

Wet/dry wheel combination sharpens, hones, and hollow grinds all kinds of tools from lawn mower blades to screwdrivers. Includes tool rest and eye shield. Maximum speed: 160 RPM wet 3450 RPM dry Wheel diameter: 8" wet 6" dry Wheel face: 1-5/8" wet 13/16" dry Shaft Diameter: 1/2" wet 5/8" dry Volts: 110 Amps: 3.4 Shipping Weight: 30.20 lbs.

Knife Making: Belt Sander/Grinder Tracking Wheel Assembly This listing answers certain requests by buyers who want to test their own skills in building the belt sander. This tracking/idle wheel assembly is ready made component and designed to fit over 1-3/4" tubing. You need to position this unit in the right place and tighten two bolts on its bottom.