0.5 of 10000 for sale, brand-new and used.

ZXY6005S NC DC-DC Power Supply Module Programmable 60V 5A 300W Constant Voltage/Constant Current (This is new and improved update to popular ZXY6005 Module) For more details see ZXY6005s User Manual : casogo.com/Manual/ZXY6005S%20User%20manual%20R2.2.pdf Introduction: ZXY-6005S is single output programmable switch power supply. Its specification is 60V- 5A- 300W. It designed by DC-DC modularization -has a small size and a high output power.

Characteristic data Operating voltage 10...30 V DC Connection Connector, M12x1-S04 Switching freq. f max. 10000 Hz Indicator Ready - LED GN Duration of time function 20 ms Input function Same function as key Setting Contrast (switching point), Key lock on/off, Time function on/off, Lighton/ dark-on, Switching output PNP/NPN Time function Turn-off delay Adjuster Key (2x)/Slide switch (3x) Short-circuit protected Yes Protected against polarity reversal Yes Encl

3MD560 Leadshine 3 Phase 8.4A 1-axis Stepping Motor Driver

Galil PCI Optima series 3 axis motion controller DMC1830 revision C Condition: tested with both servo and stepper, OK. Cable-100-1m included (175$ value); axes currently configured by me (jumpers and EEPROM) for: X = servo, Y and Z = step. CD (copy of the original one) includes: drivers, utilities, manuals and command references.

Overview The MA860H is a high performance microstepping driver based on pure-sinusoidal currentcontrol technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.

Key Features High performance, cost-effective Supply voltage up to 50DC Output current up to 4.5A Self-adjustment technology Pure-sinusoidal current control technology Pulse input frequency up to 300 KHz TTL compatible and optically isolated input Automatic idle-current reduction 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev Suitable for 2-phase and 4-phase motors Support PUL/DIR and CW/CCW modes Short-voltage, over-voltage, over-current protections

Leadshine 2 phase stepper motor 8.5NM 6.0A 86HS85+DMA860H 2 phase drive 24-80DCV New original brand DMA860H Description

Xinje 3 Phase Stepper Drive DP-508S-L DP-508S Up to 80VDC 5.0A 200Hz New

Xinje 2 Phase Stepper Drive DP504-L Up to 40VDC 5.0A 200Hz 200 Subdivision New

Leadshine 2 phase stepper motor 8.5NM 6.0A 86HS85+M542-05 2 phase stepper drive M542-05

Xinje 2 Phase Stepper Drive DP508A-L Up to 80VDC 5.0A 200Hz 200 Subdivision New

Xinje 3 Phase Stepper Drive DP-7022 Up to 220VAC 7.0A 200Hz 300 Subdivision New

DMA860H-DK Leadshine 2 phase digital stepper drive 24-80DCV 7.2A motor adapter 86 110 original brand new Description: The DMA860H-DK is a versatility fully digital stepping drive based on a 32-bit DSP technology. Users can set any micro-stepping in 512 bits and any current beyond current rating, which can reach the needs of many situations. Because of the built-in micro-stepping technology, it can reach the high micro stepping and operates so smoothly w

Leadshine 2phase motor 4.5NM 3.0A 86HS45+M542-05 Leadshine 2phase stepper Driver M542-05

Xinje 3 Phase Stepper Drive Drive DP-7022C Up to 220VAC/336VDC 7.0A 200Hz New

3ph 57mm NEMA23 86mm NEMA34 motor Stepper drive 3ND583 18-50VDC 2.1-8.3A Leadshine New 3ND583

what's in box? 1x 34HS5435B , 1600oz-in/3.5A dual shaft 4 lead wire 1 x DM860 24V-80V DC peak current 7.8A

WHAT'S IN BOX ? 4pcs&nb